Powertrain Control Module (PCM) Diagnostic Trouble Code (DTC) Index
POWERTRAIN CONTROL MODULE DIAGNOSTIC TROUBLE CODE INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1213 | Anti-theft Number of Programmed Encoded Ignition Keys Below Minimum | PCM | PROGRAM additional keys. Refer to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . CLEAR the DTCs. REPEAT the self-test. |
| B2103 | Antenna Not Connected | PCM | GO to PINPOINT TEST A . |
| B1600 | No Key Code Received | PCM | GO to PINPOINT TEST B . |
| B1601 | Unprogrammed PATS Key | PCM | GO to PINPOINT TEST C . |
| B1602 | Invalid Key Code Format From Encoded Ignition Key Transponder | PCM | GO to PINPOINT TEST D . |
| B1681 | PATS Transceiver Signal Is Not Received | PCM | GO to PINPOINT TEST E . |
| B2431 | Transponder Programming Failure | PCM | PROGRAM a new key. Refer to KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . CLEAR the DTCs. REPEAT the self-test. |
| B1342 | PCM is Defective | PCM | INSTALL a new PCM. REFER to ELECTRONIC ENGINE CONTROLS . CLEAR the DTCs. REPEAT the self-test. |
| - | All Other DTCs | REFER to MULTIFUNCTION ELECTRONIC MODULES . |