Component Testing Procedure
MULTIFUNCTION SWITCH, LAMP PORTION - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Flash-to-pass | 10 and 9 | Pull stalk sightly towards steering wheel | Closed circuit |
| High beam | 10 and 8 | Toggle stalk towards steering wheel | Closed circuit |
| Turn signal | 10 and 6 | Turn switch to Left | Closed circuit |
| 10 and 7 | Turn switch to Right | Closed circuit |