LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Freestyle SE, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Remote Keyless Entry Keypad Code Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry Keypad Code Programming

NOTE: The system allows 3 personal codes to be programmed.
NOTE: Any existing personal code does not need to be erased to program a new code.
  1. Enter the permanent factory remote keyless entry (RKE) keypad code.
  2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
  3. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 1 settings. Entering any new personal code automatically erases the old personal code.
  4. Press the 3/4 button within 5 seconds to activate the programming mode. Holding the 3/4 button for more than 2 seconds after activation erases the stored personal code.
  5. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 2 settings. Entering any new personal code automatically erases the old personal code.
  6. Press the 5/6, 7/8, 9/0, 7/8 and 9/0 button within 5 seconds or allow the system to timeout to activate the programming mode.
  7. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.
scientia non olet · About LEMON Manuals