System Specifications

Front cover bolts and stud bolts 19 Nm (14 ft. lbs.)
Block cradle to engine front cover bolts 9 Nm (80 inch lbs.)

Jackshaft front sprocket bolt
Tighten in 2 stages.
^ Stage 1: Tighten to 45 Nm (33 ft. lbs.)
^ Stage 2: Tighten an additional 90 degrees.

Jackshaft rear sprocket bolt
Tighten in 2 stages.
^ Stage 1: Tighten to 20 Nm (15 ft. lbs.)
^ Stage 2: Tighten an additional 90 degrees.

Crankshaft pulley bolt
Tighten the bolt in 2 stages.
^ Stage 1: Tighten to 45 Nm (33 ft. lbs.)
^ Stage 2: Tighten an additional 85 degrees