Generator On-Vehicle Tests: Notes
CAUTION:
To prevent damage to the generator, do not make jumper wire connections except as directed.
CAUTION:
Do not allow any metal object to come in contact with the housing and the internal diode cooling fins with key ON or OFF. A short circuit may result and burn out the diodes.
NOTE:
Battery posts and cable clamps must be clean and tight for accurate meter indications.
NOTE:
Refer to the battery tester manual for complete directions for testing the charging system.
- Turn off all lamps and electrical components.
- Place the transmission in NEUTRAL and apply the parking brake.
- Carry out the Load Test and No-Load Test according to the following component tests: