LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> General Procedures >> Exhaust System Alignment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust System Alignment

    WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM .
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Loosen all fasteners joining the exhaust system components.
  3. Beginning at the front of the vehicle, align the exhaust system to establish the maximum clearance. Make sure all fit pipes are pushed all the way into the preceding pipe and the notches are correctly lined up with the tabs.
  4. Beginning at the front of the vehicle, tighten all fasteners and clamps to specification. For additional information, refer to SPECIFICATIONS .
  5. Start the engine and check the exhaust system for leaks.
    6. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM .
  6. If equipped with fire suppression system, repower the system.
scientia non olet · About LEMON Manuals