LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Cutaway 6.0 P >> Repair and Diagnosis >> External Pages >> Different car >> Section 391 (Component Testing) >> Component Testing >> Multifunction Switch, Wiper/Washer Portion >> Component Testing Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing Procedure

WARNING: This page is about a different car, the 2006 Mercury Mountaineer and 2006 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, WIPER/WASHER PORTION COMPONENT TESTING

Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
Washer switch circuit  13 and 15 Rear, Washer switch depressed Closed circuit
14 and 15
13 and 15 Rear, Washer switch normal Open circuit
14 and 15
10 and 15 front Closed circuit
front Open circuit
Rear wiper switch circuit  13 and 15 Off Open circuit
On Closed circuit
Interval Closed circuit
14 and 15 Off Open circuit
On Closed circuit
Interval Open circuit
Wiper switch circuit  9 and 15 Off Open circuit
High Closed circuit
Low Open circuit
11 and 15 Off Open circuit
High Open circuit
Low Open circuit
12 and 15 Off Open circuit
High Closed circuit
Low Closed circuit
15 and 16 Off Open circuit
High Closed circuit
Low Closed circuit
Intermittent wiper circuit  15 and 16 Interval 1 Open circuit
Interval 2 Open circuit
Interval 3 Open circuit
Interval 4 Closed circuit
Interval 5 Closed circuit
11 and 15 Interval 1 Open circuit
Interval 2 Closed circuit
Interval 3 Closed circuit
Interval 4 Closed circuit
Interval 5 Open circuit
12 and 15 Interval 1 Closed circuit
Interval 2 Closed circuit
Interval 3 Open circuit
Interval 4 Open circuit
Interval 5 Open circuit