Component testing procedure
IGNITION SWITCH (11572) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohm-meter to terminals | Move key to these positions | A good switch will indicate |
|---|---|---|---|
| Battery Power Circuit | 2 and 7 | Off/Lock | Closed circuit |
| 2 and 9 | Run | Closed circuit | |
| 7 and 9 | Start | Closed circuit | |
| Accessory | Closed circuit | ||
| Start power circuit | 2 and 5 | Off/Lock | Open circuit |
| 7 and 1 | Start | Closed circuit | |
| Run power circuit | 2 and 8 | Off/Lock | Open circuit |
| 7 and 1 | Run | Closed circuit | |
| 9 and 3 | Start | Open circuit | |
| Run/Ace power circuit | 9 and 3 | Off/Lock | Open circuit |
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Accessory | Closed circuit |