Component testing procedure
DRIVER SIDE FRONT SEAT ADJUST SWITCH COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 3 and 1 | Rest | Open circuit |
| 1 and all others except 3 | Rest | Closed circuit | |
| Front up/down circuit | 3 and 8 | Up | Closed circuit |
| 3 and 6 | Down | Closed circuit | |
| Rear up/down circuit | 3 and 7 | Up | Closed circuit |
| 3 and 4 | Down | Closed circuit | |
| Entire seat circuit | 3 and 2 | Rearward | Closed circuit |
| 3 and 5 | Forward | Closed circuit | |
| 3 and 6 | Down | Closed circuit | |
| 3 and 4 | Down | Closed circuit | |
| 3 and 8 | Up | Closed circuit | |
| 3 and 7 | Up | Closed circuit |