System Specifications

DIFFERENTIAL FLUID CAPACITY

VISTEON 8.8 / 9.75 INCH
Conventional and Traction-Lok 5.5 pints (2.6L)
NOTE: Fill Visteon axles 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.

DANA M60 (M248) E250/350
Conventional and Limited Slip Axle 6.3 pints (3.0L)
NOTE: Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.

DANA M70 (M248) E-350
Conventional and Traction-Lok 6.3 pints (3.0L)
NOTE: Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.

DANA M70FF (M267FF) E-350
Limited Slip Axle 6.8 pints (3.2L)
NOTE: Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.

DANA M70FF (M267FF) E-350
Conventional Axle 6.6 pints (3.1L)
NOTE: Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.