LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Escape Base, 2.3 Z, FWD, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Removal And Installation >> Power Steering Control (PSC) Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING - HYBRID .
    • Position the BJB aside.
  2. Disconnect the power steering control module electrical connectors.
  3. Remove the 2 power steering control module nuts.
    • To install, tighten to 23 Nm (17 lb-ft).
  4. Remove the power steering control module ground cable bolt.
  5. Remove the power steering control module nuts from inside the vehicle.
    • To install, tighten to 23 Nm (17 lb-ft).
  6. Remove the power steering control module.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals