Key Programming Switch State Control: Notes
SPECIAL TOOLS REFERENCE
| Worldwide Diagnostic System (WDS) Vehicle Communication Module (VCM) with appropriate adapters, or equivalent diagnostic tool |
NOTE:
- The spare key programming switch is a diagnostic tool programmable switch which provides the capability to enable/disable the customer spare key programming procedure. This procedure is in the Owner's Literature spare key programming procedure or under Key Programming Using Two Programmed Keys . This programmable switch is provided as a convenience for customers who may not want the spare key programming procedure available to the vehicle driver.
- The spare key programming switch state can be viewed by PCM PID SPARE_KY.
- Insert a programmed ignition key into the ignition lock cylinder and turn the ignition switch to RUN.
- Using the diagnostic tool Ford service function (FSF) card, select PCM from the menu. Follow SECURITY ACCESS to obtain security access. For additional information, refer to ANTI-THEFT SECURITY ACCESS .
- From the diagnostic tool menu, select SPARE KEY PROGRAMMING SWITCH selection to desired setting:
< ENABLE > spare key programming procedure is accessible.
< DISABLE > spare key programming procedure is not accessible.
NOTE:
The default setting on delivery of all new vehicles is < ENABLE >.