Component Testing Procedure
POWER WINDOW SWITCHES COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Window regulator circuit | 3 and 7 | Rest | Closed circuit |
| Up | Closed circuit | ||
| Down | Open circuit | ||
| 2 and 7 | Rest | Open circuit | |
| Up | Open circuit | ||
| Down | Closed circuit | ||
| 2 and 1 | Rest | Open circuit | |
| Up | Closed circuit | ||
| Down | Open circuit | ||
| 6 and 1 | Rest | Closed circuit | |
| Up | Open circuit | ||
| Down | Closed circuit |