DTC P0602: Powertrain Control Module (Pcm) Programming Error
P0602 - POWERTRAIN CONTROL MODULE (PCM) PROGRAMMING ERROR
| Description: | This DTC indicates a programming error within the vehicle ID (VID) block. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Using the diagnostic tool, reprogram the VID block. If the PCM does not allow reprogramming of the VID block, reprogram the PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | ||