LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Focus ZX4 SE, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Speed Control System >> Diagnosis And Testing >> Speed Control >> Pinpoint Tests >> Pinpoint Test F: The Speed Control Is Inoperative - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle >> Pinpoint Test F: The Speed Control Is Inoperative - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test F: The Speed Control Is Inoperative - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle

  1. F1 CHECK THE SPEED CONTROL CABLE 
    • Check the speed control cable for correct attachment at the speed control actuator and throttle body.
    • Is the speed control cable attached correctly? 

    Yes  : GO to  F2.

    No  : CONNECT the speed control cable. TEST the system for normal operation.

  2. F2 CHECK FOR A STICKING OR BINDING SPEED CONTROL CABLE 
    • Check the speed control cable for sticking or binding.
    • Is the speed control cable OK? 

    Yes  : INSTALL a new speed control actuator. REFER to SPEED CONTROL ACTUATOR . TEST the system for normal operation.

    No  : REPAIR or INSTALL a new speed control cable. REFER to SPEED CONTROL CABLE . TEST the system for normal operation.

scientia non olet · About LEMON Manuals