Timing Cover

Engine front cover studs
Install the engine front cover with the engine front cover studs in their original locations.
^ Tighten the engine front cover studs to 7 Nm (62 inch lbs.).
^ Using a new gasket, install the coolant pump.
^ Tighten the fasteners in the sequence shown.





Engine front cover bolts
^ Tighten bolt No. 12 to 10 Nm (89 inch lbs.).
^ Tighten all other fasteners to 28 Nm (21 ft. lbs.).
Install the 2 oil pan-to-engine front cover bolts.
^ Tighten to 10 Nm (89 inch lbs.).