Component Testing Procedure
MULTIFUNCTION SWITCH, LAMP PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| High beam | 10 and 9 | High beam | Closed circuit |
| Flash-to-pass | Open circuit | ||
| Low beam | Open circuit | ||
| Low beam/Flash-to-pass | 12 and 9 | High beam | Open circuit |
| Flash-to-pass | Closed circuit | ||
| Low beam | Closed circuit | ||
| 10 and 11 | High beam | Open circuit | |
| Flash-to-pass | Closed circuit | ||
| Low beam | Open circuit |
MULTIFUNCTION SWITCH, LAMP PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 1, C202a and 2, C202a | Left turn | Closed circuit |
| 1, C202a and 2, C202c | Left turn | Closed circuit | |
| 1, C202a and 3, C202a | Right turn | Closed circuit | |
| 1, C202a and 5, C202a | Right turn | Closed circuit | |
| Hazard | 1, C202a and 2, C202a | Turn signal switch in neutral, Hazard On | Closed circuit |
| 1, C202a and 2, C202c | |||
| 1, C202a and 3, C202a | |||
| 1, C202a and 5, C202c | |||
| 6, C202a and 10, C202a | |||
| 4, C202a and 2, C202c | Turn signal switch in neutral, Hazard On | Open circuit | |
| 4, C202a and 5, C202a | |||
| 9, C202a and 10, C202a | |||
| 10, C202a and 6, C202a | Turn signal switch in neutral, Hazard Off | Open circuit | |
| 4, C202a and 2, C202c | Turn signal switch in neutral, Hazard Off | Closed circuit | |
| 4, C202a and 5, C202a | |||
| 9, C202a and 10, C202a |