Component testing procedure
SEAT ADJUST SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 11 and 1,2,3,4,5,8,9,10 | Rest | Open circuit |
| 7 and 1,2,3,4,5,8,9,10 | Rest | Closed circuit | |
| Front height circuit | 11 and 1 | Up | Closed circuit |
| 7 and 8 | |||
| 11 and 8 | Down | Closed circuit | |
| 7 and 1 | |||
| Rear height circuit | 11 and 4 | Up | Closed circuit |
| 7 and 5 | |||
| 11 and 5 | Down | Closed circuit | |
| 7 and 4 | |||
| Forward/rearward circuit | 11 and 9 | Rearward | Closed circuit |
| 7 and 10 | |||
| 11 and 10 | Forward | Closed circuit | |
| 7 and 9 | |||
| Backrest circuit | 11 and 3 | Rearward | Closed circuit |
| 7 and 2 | |||
| 11 and 2 | Forward | Closed circuit | |
| 7 and 3 |