Symptom Chart

Condition	Possible Sources	Action
The brake shift interlock system does not release/lock correctly	Circuit(s) Fuse(s): 11 (15A) 6 (10A) BSIA Brake pedal position (BPP) switch	Go to Pinpoint Test A .
The selector lever is out of correct gear relationship	Transmission selector lever cable and bracket Selector lever cable retention to steering column bracket Selector lever linkage	Go to Pinpoint Test B .
The selector lever indicator does not correspond to the gear	Transmission selector lever cable bracket	TIGHTEN the bolts holding the transmission selector lever cable bracket.
	Selector lever indicator linkage	ADJUST PRNDL indicator at steering housing.
	Transmission selector lever cable loose from the transmission retainer bracket	VERIFY the transmission selector lever cable is seated in the transmission retainer bracket.
	Selector lever cable adjustment incorrect	VERIFY the transmission selector lever cable adjustment. REFER to General Procedures. ADJUST the transmission selector lever cable if necessary.
The transmission range indicator lamp does not illuminate	Bulb Circuit(s)	REFER to INSTRUMENT CLUSTER AND PANEL ILLUMINATION article.
The transmission control (TC) switch/indicator lamp is not operating correctly	Fuse TC switch not cycled during self-test Powertrain control module (PCM) Circuit(s)	Go to Pinpoint Test C .