LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Cutaway 6.8 S >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - 5R110W - General Procedures, In-Vehicle Servicing, Removal, Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation >> Disassembly And Assembly Of Subassemblies >> Direct Clutch Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Direct Clutch Assembly: Disassembly

NOTE: Soak all friction clutch plates in clean transmission fluid.
Fig 1: Locating Snap Ring
G03889456Courtesy of FORD MOTOR CO.
  1. Remove the snap ring.
    2. Fig 2: Locating Clutch Plates
    GF0006944Courtesy of FORD MOTOR CO.
  2. Remove the direct clutch plates.
    3. Fig 3: Identifying Snap Ring With Special Tools
    G03889458Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the snap ring.
    4. Fig 4: Locating Clutch Balance Piston And Return Spring
    G03889459Courtesy of FORD MOTOR CO.
    NOTE: Note the orientation of the return spring.
  4. Remove the direct clutch balance piston and return spring. Discard the direct clutch balance piston.
    5. Fig 5: Locating Direct Clutch Piston
    G03889460Courtesy of FORD MOTOR CO.
  5. Remove and discard the direct clutch piston.
  6. Clean and inspect all components for damage.
scientia non olet · About LEMON Manuals