LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Cutaway 6.8 S >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - 5R110W - General Procedures, In-Vehicle Servicing, Removal, Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation >> Disassembly And Assembly Of Subassemblies >> Forward Clutch Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forward Clutch Assembly: Disassembly

NOTE: Soak all friction clutch plates in clean transmission fluid.
Fig 1: Identifying Seals And Thrust Washer
G03889439Courtesy of FORD MOTOR CO.
  1. Remove and discard the 2 seals and remove the No. 7 thrust washer.
    2. Fig 2: Identifying Forward Clutch Thrust Bearing
    G03889440Courtesy of FORD MOTOR CO.
  2. Remove the No. 8 forward clutch thrust bearing.
    3. Fig 3: Locating Snap Ring And Forward Clutch Plates
    G03889441Courtesy of FORD MOTOR CO.
  3. Remove the snap ring and the forward clutch plates.
    4. Fig 4: Identifying Snap Ring With Special Tools
    GF0006940Courtesy of FORD MOTOR CO.
  4. Using the special tools, remove the snap ring.
    5. Fig 5: Locating Forward Clutch Balance Piston Return Spring
    G03889443Courtesy of FORD MOTOR CO.
    NOTE: Note the orientation of the return spring.
  5. Remove the forward clutch balance piston and the return spring. Discard the forward clutch balance piston.
    6. Fig 6: Locating Forward Clutch Piston
    G03889444Courtesy of FORD MOTOR CO.
  6. Remove and discard the forward clutch piston.
  7. Clean and inspect all components for damage.
scientia non olet · About LEMON Manuals