LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Econoline E250, Van Cargo Extended, 5.4 L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Automatic Transmission - 5R110W - General Procedures, In-Vehicle Servicing, Removal, Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation) >> Disassembly And Assembly Of Subassemblies >> Forward GEARTRAIN - Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forward GEARTRAIN - Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
Fig 1: Locating Forward Clutch Assembly
GF0006956Courtesy of FORD MOTOR CO.
  1. Install the forward clutch assembly into the direct clutch assembly.
    2. Fig 2: Locating No. 9 Forward Clutch Bearing
    GF0006957Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    3. Fig 3: Locating Forward Hub And Ring Gear Assembly
    GF0006958Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    4. Fig 4: Locating Planet Carrier And Bearing Assembly
    GF0006959Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    5. Fig 5: Locating No. 12 Thrust Bearing
    GF0006960Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    6. Fig 6: Identifying Forward Clutch Assembly
    GF0006961Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
    7. Fig 7: Installing The Forward Geartrain As An Assembly
    GF0006962Courtesy of FORD MOTOR CO.
  7. Install the special tools. Position aside to use during transmission assembly.
scientia non olet · About LEMON Manuals