LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Econoline E250, Van Cargo Extended, 5.4 L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Automatic Transmission - 5R110W - General Procedures, In-Vehicle Servicing, Removal, Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation) >> Disassembly And Assembly Of Subassemblies >> Input Shell Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Shell Assembly

WARNING: This page is about a different variant/trim than selected.
Fig 1: Inspecting Forward/Reverse Sun Gear And Input Shell Assembly
GF0006952Courtesy of FORD MOTOR CO.
  1. Clean and inspect the forward/reverse sun gear and input shell assembly. Check the sun gear teeth, lug teeth and thrust surface for damage. If any evidence of damage is found, a new input shell assembly must be installed.
    2. Fig 2: Inspecting Front Bushing For Damage
    GF0006953Courtesy of FORD MOTOR CO.
  2. Inspect the front bushing for damage. If any damage is found a new input shell assembly must be installed.
scientia non olet · About LEMON Manuals