LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Econoline E250, Van Cargo Extended, 5.4 L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Automatic Transmission - 5R110W - General Procedures, In-Vehicle Servicing, Removal, Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation) >> In-Vehicle Servicing >> Output Shaft Speed (OSS) Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed (OSS) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Output Shaft Speed (OSS) Sensor & Bolt
GF0012403Courtesy of FORD MOTOR CO.
  1. Install the OSS sensor.
    • Lubricate the O-ring and install the OSS sensor.
    • Install the bolt.
      • Tighten to 9 Nm (80 lb-in).
    2. Fig 2: Identifying Output Shaft Speed (OSS) Sensor Electrical Connector
    G03889074Courtesy of FORD MOTOR CO.
  2. Connect the OSS sensor electrical connector.
scientia non olet · About LEMON Manuals