Removal And Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: Some solenoid body bolts and wire loom bolts will need to be removed in order to remove affected solenoids.

NOTE: The line pressure solenoid is not serviced in the vehicle. The solenoid body will need to be removed to remove line pressure solenoid. For additional information, refer to Solenoid Body Assembly .

Remove the transmission fluid pan, gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter .

Fig 1: Disconnecting Affected Shift Solenoid Electrical Connector

Courtesy of FORD MOTOR CO.

Disconnect the affected shift solenoid electrical connector.

Fig 2: Identifying Affected Shift Solenoid

Courtesy of FORD MOTOR CO.

Remove the affected shift solenoid.
- Remove the retaining E-clip.
- Remove the affected shift solenoid.
To install, reverse the removal procedure.