Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- If installing a new Headlamp Control Module (HCM), upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION -- FUSION MILAN & MKZ article.
- Disconnect the HCM electrical connector.
- Remove the 2 pin-type retainers and the HCM.
- To install, reverse the removal procedure.
- If installing a new HCM, download the HCM configuration information from the scan tool into the new HCM. For additional information, refer to Programmable Module Installation (PMI) MODULE CONFIGURATION -- FUSION MILAN & MKZ article.