Removal And Installation
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Upload the SDARS module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION article.
- Disconnect the SDARS module antenna cable and electrical connectors.
- Remove the 2 nuts, the bolt, and the SDARS module.
- To install, reverse the removal procedure.
- Download the configuration information to the SDARS module. For additional information, refer to PMI in MODULE CONFIGURATION article.
NOTE:
Module configuration is only required if a new satellite digital audio receiver (SDARS) module is being installed.
NOTE:
Move the passenger seat all the way back to access.