Component testing procedure
LIGHT SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 6 and 7 | Left turn | Open circuit |
| 8 and 7 | Left turn | Closed circuit | |
| 8 and 7 | Right turn | Open circuit | |
| 6 and 7 | Right turn | Closed circuit | |
| Headlamp | 13 and 10 | Autolamps | Open circuit |
| Off | Open circuit | ||
| Park | Open circuit | ||
| Head | Closed circuit | ||
| Park lamps | 12 and 10 | Autolamps | Open circuit |
| Off | Open circuit | ||
| Park | Closed circuit | ||
| Head | Closed circuit | ||
| Autolamps | 14 and 10 | Autolamps | Closed circuit |
| Off | Open circuit | ||
| Park | Open circuit | ||
| Head | Open circuit | ||
| High beam | 2 and 10 | High beam | Closed circuit |
| Flash-to-pass | Closed circuit | ||
| Low beam | Open circuit | ||
| Flash-to-pass | 1 and 10 | High beam | Open circuit |
| Flash-to-pass | Closed circuit | ||
| Low beam | Open circuit |