Component testing procedure
POWER SEAT SWITCH, WITH HEAT - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Seat up/down circuit, rear | H and C | Up | Closed circuit |
| D and E | |||
| H and D | Down | Closed circuit | |
| C and E | |||
| Seat up/down circuit, front | H and A | Up | Closed circuit |
| B and E | |||
| H and B | Down | Closed circuit | |
| A and E | |||
| Seat forward/rearward sensor | H and G | Forward | Closed circuit |
| F and E | |||
| H and F | Rearward | Closed circuit | |
| G and E |