PINPOINT TEST FD: Brake Pedal Inputs: Introduction

This pinpoint test is intended to diagnose the following:

• brake pedal position (BPP) (13480)
• brake pedal switch (BPS) (9F924), (9C872)
• harness circuits: B+, BPP, BPS
• powertrain control module (PCM) (12A650)

Refer to the appropriate SYSTEM WIRING DIAGRAMS article for specific vehicle application and pin locations.

Powertrain Control Module (PCM) Connector 

For PCM connector views or reference values, refer to the REFERENCE VALUES article.