LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Escape Base, 2.3 Z, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1042 (Electronic Compass System) >> Diagnostic Tests >> Electronic Compass >> Pinpoint Tests >> Pinpoint Test B: The Outside Air Temperature Is Inaccurate/Inoperative >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The compass and ambient air temperature display can be turned on and off by pressing the SELECT switch in the overhead console.

The temperature can be displayed in Celsius or Fahrenheit by pressing the SELECT switch.

The ambient air temperature display receives temperature input from the ambient air temperature sensor through circuits 470 (PK/BK) and 767 (LB/OG). If the circuits are shorted or open, then the display shows 60°C (140°F) (shorted), or -40°C (-40°F) (open).

The ambient air temperature display receives voltage from the central junction box (CJB) fuse 3 (15A) through circuit 137 (YE/BK). Ground for the ambient air temperature display is provided by circuit 1205 (BK).

This pinpoint test is intended to diagnose the following: