SSA, SSB in Bench Mode

The BENCH Mode allows the technician to carry out electrical circuit checks on the following components:

• SSA - Activates SSA OFF or ON.
• SSB - Activates SSB OFF or ON.

OSC "SSA/B" BENCH Mode operates ONLY when:

• VSS and TR sensor are operational.
• No VSS and TR sensor DTCs.
• Transaxle range selector lever in P.
• Key ON.
• Engine OFF.

OSC Command Values:

• OFF - turns solenoid OFF.
• ON - turns solenoid ON.
• XXX - cancels OSC sent value.
• SEND - sends the values to PCM.

BENCH Mode procedure for SSA, SSB:

Follow operating instructions from the scan tool menu screen:

• Select "Output State Control."
• Select "Trans-Bench Mode."
• Select "PIDs" to be monitored.
• Monitor all selected PIDs during test.
• Select "Parameters - SSA, SSB (SS1, SS2)."
• Select "ON" to turn solenoid ON.
• Press "SEND" to send command.
• Select "OFF" to turn solenoid OFF.
• Press "SEND" to send command.
• Select "XXX" to cancel at any time.
• Press "SEND."