LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Focus SE, 4D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Module >> Removal And Installation >> Generic Electronic Module (GEM) >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

    CAUTION: Prior to the removal of the module, it is necessary to upload the module configuration information to the appropriate diagnostic equipment. This information needs to be downloaded into the new module once installed. For additional information, refer to MODULE CONFIGURATION article.
    CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  2. Open the glove compartment to the full open position.
  3. Disconnect the generic electronic module (GEM) electrical connectors.
  4. Remove the GEM.
    5. CAUTION: Make sure that the wiring harnesses are correctly routed. Pinching the wiring harnesses between the GEM and its mounting surface may cause damage to the wiring harness.
  5. To install, reverse the removal procedure.
    • Once the GEM is installed, it is necessary to download the module configuration information from the scan tool into the new module. For additional information, refer to MODULE CONFIGURATION article.
scientia non olet · About LEMON Manuals