LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Freestar Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System - General Information >> General Procedures >> Spring Lock Couplings >> Connect
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spring Lock Couplings: Connect

  1. Inspect and clean both coupling ends. Install new O-rings and garter springs if necessary.
    • Lubricate the O-rings with clean engine oil.
    2. Fig 1: Installing O-Ring Seals & Garter Springs
    GF0004206Courtesy of FORD MOTOR CO.
  2. Fit the male fitting into the female end and push until the garter spring snaps over the flared end of the female fitting.
    3. Fig 2: Connecting Coupling Ends
    G03924106Courtesy of FORD MOTOR CO.
  3. Make sure the coupling is engaged by pulling on the tubes.
    4. Fig 3: Checking Coupling Engagement By Pulling On Tubes
    GF0004207Courtesy of FORD MOTOR CO.
  4. Install the safety clip.
    5. Fig 4: Safety Clip
    GF0033565Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals