Component testing procedure
MULTIFUNCTION SWITCH, LAMP PORTION - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Flash-to-pass | 1 and 3 6 and 3 |
Pull and hold lever stalk toward steering wheel | Closed circuit |
| High beam | 1 and 3 | Lever stalk in detent away from steering wheel | Closed circuit |
| Low beam | 6 and 3 | Lever stalk in detent toward steering wheel | Closed circuit |
| Turn signal | 2 and 3 | Hazard switch to Normal (Off) and Turn switch to Left | Closed circuit |
| 5 and 3 | Hazard switch to Normal (Off) and Turn switch to Right | Closed circuit |