LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Freestar SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Component Testing) >> Component Testing >> Multifunction Switch, Wiper/Washer Portion >> Component testing procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component testing procedure

WARNING: This page is about a different car, the 2007 Mercury Montego and 2007 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, WIPER/WASHER PORTION - COMPONENT TESTING

Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
Washer switch circuit 5 and 2 Washer switch depressed Closed circuit
Wiper switch circuit 4 and 2 Off Open circuit
High Closed circuit
Low Open circuit
6 and 2 Off Open circuit
High Closed circuit
Low Closed circuit
12 and 2 Off Open circuit
High Closed circuit
Low Closed circuit


MULTIFUNCTION SWITCH, WIPER/WASHER PORTION - COMPONENT TESTING

Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
Wiper switch circuit (rear wiper) 8 and 7 Interval 1 Closed circuit
10 and 7 Open circuit
8 and 7 Interval 2 Closed circuit
10 and 7 Closed circuit
Intermittent wiper circuit 1 and 2 Interval 1 Open circuit
Interval 2 Closed circuit
Interval 3 Closed circuit
Interval 4 Closed circuit
Interval 5 Open circuit
6 and 2 Interval 1 Closed circuit
Interval 2 Closed circuit
Interval 3 Open circuit
Interval 4 Open circuit
Interval 5 Open circuit
12 and 2 Interval 1 Open circuit
Interval 2 Open circuit
Interval 3 Open circuit
Interval 4 Closed circuit
Interval 5 Closed circuit
Mist Circuit 6 and 2, 12 and 2 Mist Closed circuit
Mist Circuit (rear wiper) 8 and 7 Rear washer Open circuit
10 and 7 Rear washer Closed circuit