Component testing procedure
SEAT ADJUST SWITCH, DRIVER SIDE FRONT (14A701), WITHOUT POWER RECLINER - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 2 and 1, 3, 5, 6, 7, 8 | Rest | Closed circuit |
| 2 and 4 | Rest | Open circuit | |
| Tilt, front | 4 and 1 | Up | Closed circuit |
| 4 and 8 | Down | Closed circuit | |
| Tilt, rear | 4 and 5 | Up | Closed circuit |
| 4 and 6 | Down | Closed circuit | |
| Forward/rearward circuit | 4 and 3 | Forward | Closed circuit |
| 4 and 6 | Rearward | Closed circuit |