Component testing procedure
IGNITION SWITCH (11572) - COMPONENT TESTING
| Circuit to test | Connect self powered test light or ohmmeter to terminals | Move key to these positions | A good switch will indicate |
|---|---|---|---|
| Battery power circuit | 2 and 7 2 and 9 7 and 9 |
Off/Lock | Closed circuit |
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Accessory | Closed circuit | ||
| Start power circuit | 2 and 5 7 and 1 |
Off/Lock | Open circuit |
| Start | Closed circuit | ||
| Run power circuit | 2 and 8 7 and 1 9 and 3 |
Off/Lock | Open circuit |
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Run/ACC power circuit | 9 and 3 | Off/Lock | Open circuit |
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Accessory | Closed circuit |