Component testing procedure
MULTIFUNCTION SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Off | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Off | Open at all cavities. |
| Int 1 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Int 1 | Closed at cavity 4, open at all other cavities |
| Int 2 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Int 2 | Closed at cavities 3 and 4, open at all other cavities. |
| Int 3 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Int 3 | Closed at cavity 3, open at all other cavities. |
| Int 4 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Int 4 | Closed at cavities 3 and 6 open at all other cavities. |
| Int 5 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Int 5 | Closed at cavity 6, open at all other cavities. |
| Low | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Low | Closed at cavities 4 and 6, open at all other cavities. |
| High | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | High | Closed at cavities 1, 4, and 6 open at all other cavities |
| Wash-w/CKT 680 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Wash | Closed at cavity 2, open at cavity 1 any state at other cavities |
| Wash-w/oCKT 680 | C202c cavity 5 and C202c cavities 1, 2, 3, 4, and 6 | Wash | Closed at cavities 3, 4, and 6 open at all other cavities |
MULTIFUNCTION SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | From C202a cavity 1 to C202b cavity 2 and C202a cavity 2 |
Hazard switch to Normal (Off) and Turn switch to Left | Closed circuit |
| From C202a cavity 1 to C202a cavity 5 and C202a cavity 3 | Hazard switch to Normal (Off) and Turn switch to Right | Closed circuit | |
| Hazard | From C202a cavity 1 to C202a cavity 2, C202a cavity 3. C202a cavity 5 and C202a cavity 2 |
Hazard switch to Hazard (On) (Button pushed in and then released to fully extended position) | Closed circuit |
| Brake Lights | From C202a cavity 4 to C202a cavity 5 and C202b cavity 2 |
Turn switch to Neutral hazard switch to Normal (Off) | Closed circuit |
| Flash to pass | From C202b cavity 9 to cavity 12 and from C202b cavity 11 to cavity 10 | Pull and hold lever stalk toward steering wheel | Closed circuit |
| High beam | From C202b cavity 9 to C202b cavity 10 | Lever stalk in detent away from steering wheel | Closed circuit |
| Low beam | From C202b cavity 9 to C202b cavity 12 | Lever stalk in neutral position toward steering wheel | Closed circuit |