System Specifications

Timing Cover Bolts & Stud Bolts 19 Nm (14 ft. lbs).

Block Cradle-to-Front Cover Bolts Without Washers 14 Nm (10 ft. lbs).

Hydraulic Chain Tensioner 44 Nm (32 ft. lbs).

Jackshaft Chain Tensioner Bolts 9 Nm (80 inch lbs).

Crankshaft Pulley Bolt

Discard the crankshaft pulley bolt and washer. This bolt is torque-to-yield and cannot be reused.

First pass 45 Nm (33 ft. lbs).
Final pass Tighten 85°