LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Engine System-General Information) >> Diagnosis And Testing >> Engine >> Symptom Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Symptom Chart

WARNING: This page is about a different car, the 2005 Mercury Sable and 2005 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Condition Possible Sources Action
  • Difficult starting
  • Damaged ignition system.
  • Damaged fuel system.
  • Damaged starting system.
  • Damaged charging system/battery.
  • Burnt valve.
  • INSTALL a new valve.
  • Worn piston.
  • INSTALL a new piston.
  • Worn piston rings.
  • INSTALL new piston rings.
  • Worn cylinder.
  • REPAIR or INSTALL a new cylinder block.
  • Damaged head gasket.
  • INSTALL a new head gasket.
  • Damaged cooling system.
  • Poor idling
  • Vacuum leaks.
  • Malfunctioning or damaged ignition system.
  • Malfunctioning or damaged fuel system.
  • Damaged valve tappet or lash adjuster.
  • INSTALL a new valve tappet or lash adjuster.
  • Damaged valve tappet guide or lash adjuster.
  • INSTALL a new valve tappet guide or valve tappet.
  • Incorrect valve-to-valve seat contact.
  • REPAIR or INSTALL a new valve or valve seat.
  • Damaged head gasket.
  • INSTALL a new head gasket.
  • Abnormal combustion
  • Malfunctioning or damaged fuel system.
  • Malfunctioning or damaged ignition system.
  • Malfunctioning or damaged air intake system.
  • Damaged valve tappet or lash adjuster.
  • INSTALL a new valve tappet or lash adjuster.
  • Damaged valve tappet guide or valve tappet.
  • INSTALL a new valve tappet guide or valve tappet.
  • Burnt or sticking valve.
  • REPAIR or INSTALL a new valve.
  • Weak or broken valve spring.
  • INSTALL a new valve spring.
  • Carbon accumulation in combustion chamber.
  • ELIMINATE carbon buildup.
  • Excessive oil consumption
  • Leaking oil.
  • REPAIR oil leakage.
  • Malfunctioning PCV system.
  • REPAIR or INSTALL new necessary components.
  • Worn valve stem seal.
  • INSTALL a new valve stem seal.
  • Worn valve stem or valve guide.
  • INSTALL a new valve and valve guide.
  • Sticking piston rings.
  • REPAIR or INSTALL new piston rings.
  • Worn piston ring groove.
  • INSTALL a new piston and piston pin.
  • Worn piston or cylinder.
  • REPAIR or INSTALL a new piston or cylinder block.
  • Engine noise
  • Leaking exhaust system.
  • REPAIR exhaust leakage.
  • Incorrect drive belt tension.
  • Malfunctioning generator bearing.
  • Malfunctioning water pump bearing.
  • Malfunctioning or damaged cooling system.
  • Malfunctioning or damaged fuel system.
  • Loose timing chain/belt.
  • ADJUST or INSTALL a new timing chain/belt.
  • Damaged timing chain tensioner.
  • INSTALL a new timing chain tensioner.
  • Excessive main bearing clearance.
    CAUTION: Remove the cylinder heads before removing the crankshaft. Failure to do so can result in engine damage.
  • ADJUST clearance or INSTALL a new crankshaft main bearing.
  • Seized or heat damaged crankshaft main bearing.
  • INSTALL a new crankshaft main bearing.
  • Excessive crankshaft end play.
  • INSTALL a new thrust bearing or crankshaft.
  • Excessive connecting rod bearing clearance.
  • INSTALL a new connecting rod bearing or connecting rod.
  • Heat damaged connecting rod bearing.
  • INSTALL a new connecting rod bearing.
  • Damaged connecting rod bushing.
  • INSTALL a new connecting rod bushing.
  • Worn cylinder.
  • REPAIR or INSTALL a new cylinder block.
  • Worn piston or piston pin.
  • INSTALL a new piston or piston pin.
  • Damaged piston rings.
  • INSTALL new piston rings.
  • Bent connecting rod.
  • INSTALL a new connecting rod.
  • Malfunctioning valve tappet or lash adjuster.
  • INSTALL a new valve tappet or lash adjuster.
  • Excessive valve tappet or lash adjuster clearance.
  • ADJUST clearance or INSTALL a new valve tappet guide or valve tappet.
  • Broken valve spring.
  • INSTALL a new valve spring.
  • Excessive valve guide clearance.
  • ADJUST clearance or INSTALL a new valve guide or valve.
  • Insufficient power
  • Malfunctioning or damaged ignition system.
  • Malfunctioning or damaged fuel system.
  • Malfunctioning or damaged air intake system.
  • Damaged or plugged exhaust system.
  • INSPECT exhaust system.
  • Incorrect tire size.
  • Dragging brakes.
  • Slipping transmission.
  • Refer to the appropriate Automatic Transmission article for the procedure.
  • Malfunctioning valve tappet or lash adjuster.
  • INSTALL a new valve tappet or lash adjuster.
  • Damaged valve tappet guide or valve tappet.
  • INSTALL a new valve tappet guide or valve tappet.
  • Compression leakage at valve seat.
  • REPAIR or INSTALL a new valve, valve seat or cylinder head.
  • Seized valve stem.
  • INSTALL a new valve.
  • Weak or broken valve spring.
  • INSTALL a new valve spring.
  • Worn or damaged camshaft.
  • INSTALL a new camshaft.
  • Damaged head gasket.
  • INSTALL a new head gasket.
  • Cracked or distorted cylinder head.
  • INSTALL a new cylinder head.
  • Damaged, worn or sticking piston ring(s).
  • REPAIR or INSTALL a new piston ring(s).
  • Worn or damaged piston.
  • INSTALL a new piston and piston pin.
scientia non olet · About LEMON Manuals