General Specifications
WARNING: This page is about a different car, the 2005 Mercury Sable and 2005 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads/Shoes | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake shoe minimum thickness | 3.75 mm (0.14 inch) |
| Brake Disc/Drum | |
| Front brake disc minimum thickness | 24.75 mm (0.97 inch) |
| Rear brake disc minimum thickness | 12.8 mm (0.504 inch) |
| Minimum thickness to machine front brake disc | 25.35 mm (0.99 inch) |
| Minimum thickness to machine rear brake disc | 13.4 mm (0.528 inch) |
| Brake drum maximum diameter | Molded into the brake drum |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2-B) | ESE-M12A4-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3 | ESE-M1C171-A |
| Brake Parts Cleaner PM-4 | - |