Speed Control Deactivator Switch: Installation

All vehicles 

1. Release the plunger lock (if equipped).
   • Turn the lock knob counterclockwise until the first click is felt.
Fig 1: Identifying Plunger Lock
Courtesy of FORD MOTOR CO.
2. Fully apply the brake pedal.
3. Install the speed control deactivator switch.
   1. Position the switch in the bracket and rotate it clockwise 45 degrees.
   2. Connect the electrical connector.
Fig 2: Installing Deactivator Switch
Courtesy of FORD MOTOR CO.

Vehicles equipped with locking tab 

NOTE: There should be an extra click heard when tugging on the brake pedal.
4. Slowly release the brake pedal and tug moderately once the pedal reaches the rest position.