LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SEL >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Removal And Installation >> Key-In-Ignition Warning Switch >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

  1. Remove the ignition lock cylinder. For additional information, refer to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS article.
  2. Remove the key-in-ignition warning switch.
    1. Pry the clip downward.
    2. Release the key-in-ignition warning switch from the rear of the ignition lock cylinder.
    3. Fig 1: Locating Key-In-Ignition Warning Switch
    GF0008218Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals