LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Crown Victoria LX, 4.6 W >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System And Engine Control System >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

  1. Remove the 3 pin-type retainers and the luggage compartment parcel shelf trim panel.
    2. Fig 1: Locating Pin-Type Retainers & Luggage Compartment Parcel Shelf Trim Panel
    GF0046716Courtesy of FORD MOTOR CO.
  2. Disconnect the fuel pump driver module (FPDM) electrical connector.
  3. Remove the 2 bolts and the FPDM.
    • To install, tighten to 4 Nm (35 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals