LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> E 350 V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION (CMP) SENSOR







Removal and Installation
1. Remove the air cleaner and air cleaner outlet pipe.
2. Disconnect the camshaft position (CMP) sensor electrical connector.
3. Remove the bolt and the CMP sensor. Inspect the O-ring seal for damage and install new if necessary.
- Lubricate the O-ring seal and with clean engine oil prior to installation.
- To install, tighten to 10 Nm (89 lb-in).

4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals