LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Edge Limited, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid) >> DTC Diagnosis >> P0606 - Control Module Processor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

P0606 - Control Module Processor

P0606 - CONTROL MODULE PROCESSOR

Description:  This DTC indicates an internal powertrain control module (PCM) communication error.
Possible Causes: 
  • Damaged PCM
Diagnostic Aids:  Reprogram or update the calibration. Check for other DTCs and diagnose those first. Make sure to check for aftermarket performance products before installing a new PCM. Clear the DTCs, repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   Reprogram or update the calibration. Check for other DTCs and diagnose those first. Make sure to check for aftermarket performance products before installing a new PCM. Clear the DTCs, repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM.
scientia non olet · About LEMON Manuals