LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Edge SE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Servicing >> Oil Cooler >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Cooler: Installation

  1. Using new gaskets, install the oil cooler and the 6 bolts.
    • Tighten to 10 Nm (89 lb-in).
  2. Connect the 2 coolant hoses to the oil cooler.
  3. Install the LH catalytic converter. For additional information, refer to EXHAUST SYSTEM article.
  4. Fill and bleed the cooling system. For additional information, refer to ENGINE COOLING article.
scientia non olet · About LEMON Manuals