LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Escape Base, 2.3 Z, FWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Autolock and Horn Chirp Programming >> Autolock Programming Using the Keyless Entry Keypad Procedure (If Equipped)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Autolock Programming Using the Keyless Entry Keypad Procedure (If Equipped)

  1. Turn the ignition to the OFF position.
  2. Close all the doors, the liftgate and the liftgate glass.
  3. Enter the 5-digit permanent entry code on the keyless entry keypad.
  4. Within 5 seconds of entering the code, press and hold the 3/4 button on the keypad. While holding the 3/4 button, press the 7/8 button.
  5. Release the 7/8 button, then release the 3/4 button. The horn will chirp once to indicate autolock is disabled. If the horn chirps twice (chirp followed by a honk), the autolock feature has been enabled.
scientia non olet · About LEMON Manuals