LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Escape Hybrid, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid) >> DTC Diagnosis >> P0602 - Powertrain Control Module (Pcm) Programming Error
April 5, 2026: LEMON Manuals is launched! Read the announcement.

P0602 - Powertrain Control Module (Pcm) Programming Error

P0602 - POWERTRAIN CONTROL MODULE (PCM) PROGRAMMING ERROR

Description:  This DTC indicates a programming error within the vehicle ID (VID) block.
Possible Causes: 
  • VID data corrupted by the scan tool during VID reprogramming
Diagnostic Aids:  Using the scan tool, reprogram the VID block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   The Vehicle ID (VID) Block must be reprogrammed. For instructions, refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) for the VID Block procedure.
scientia non olet · About LEMON Manuals